Why is the main machine of plastic granulator unstable
Release time:
2023-06-09 11:08
The main machine of the plastic pelletising machine consists of extrusion system, transmission system and heating and cooling system. It is a very important part of the equipment, but there are many reasons that lead to the instability of the host, so what is the cause of this? What are the treatment methods?
The main reasons:
(1) Screw adjustment pad error, or phase error, parts interference.
(2) The main motor bearing is damaged or poorly lubricated.
(3)Failure of the heater of a section of the granulator, not heated.
(4) Uneven feeding of granulator may cause unstable current of main machine.
Treatment.
(1) Check the adjustment pads, pull out the screws and check whether there is any interference with the screws.
(2) Check whether the heater of the waste plastic granulator is working properly, and replace the heater if necessary.
(3) Check the feed line to see if there is any fault. If there is a fault, it should be eliminated in time.
(4) Repair the main motor of the plastic granulator and replace the bearings if necessary. Check the feeder to see if there is a fault. If there is a fault, it should be eliminated in time.
Familiar with the mastery of the causes of instability of the main machine of the plastic granulator and the treatment method, you can easily solve as well as judge the instability of the main machine of the granulator problem in the end where the problem occurs, so as to solve the problem in time to ensure that the equipment operates normally.
Laizhou Keda Chemical Machinery Co., Ltd. specialises in the research and development, design and manufacture of chemical and plastic machinery, covering granulators, emulsifiers, reactors, kneaders, mixers, plastic granulators, stainless steel reactors and so on. Our company is located in Laizhou City, Shandong Province with convenient traffic. We are committed to strict quality control and considerate customer service, and we have professional technical research and development and sales service team.
Previous Page
Next Page
Related News
Kneader working principle is by a pair of each other together and rotating blades (generally Z-shaped) to generate a strong shear effect and make the semi-dry condition or rubbery dense plastic materials can make the material sensitive to sound so as to get a proportional mixing of dishes and configuration.
Structure and principle of stainless steel reactor
Stainless steel reactor is electrically heated reactor has the characteristics of fast temperature rise, high temperature resistance, corrosion resistance, hygiene and no pollution to the environment.
Plastic chemical raw material prices with the development of the economy is also rising, in the face of this phenomenon, the state in recent years has also vigorously urged the development and transformation of the plastic recycling granulator industry.
Plastic granulator how to plastic waste utilisation
Plastic granulator head and mould: the head consists of alloy steel inner sleeve and carbon steel outer sleeve. The head is equipped with a forming mould.
Service Hotline:
After sales:
Customer Service 1:15253566888
Customer service 2:15106511778
Pre-sales:
Customer Service 1:15064512888
Customer service 2:13695442001
Laizhou Keda Chemical Machinery Co., Ltd
Address： Xidingjia, Shahe Town, Laizhou City, Shandong Province
Tel：0535-2377668
Tel：15253566888
Fax：0535-2377767
Two-dimensional code
WeChat Public Number
Copyright - 2023 All Rights Reserved of Laizhou Keda Chemical Machinery Co., Ltd.Powered by www.300.cn SEO
