How to deal with the problem of mixer leakage
Release time:
2021-11-12 11:01
The mixer is made up of a casing, rotor, discharge door, motor and so on. The construction of its rotor determines the principle of mixing. In the process of using the mixer, it is inevitable that we will encounter various failure problems, for example, the mixer leakage is one of the failures.
As the mixer is a sealed mixing equipment for the materials prepared by the ingredients. So the leakage in mixing will directly reduce the mixing uniformity. Change the formula of the feed, so the leakage problem is a big problem of the mixer. However, due to the frequent opening and closing of the mixer door and the fineness of the material and other factors, the mixer leakage occurs frequently in the feed mill.
So what are the factors that cause the mixer leakage? To solve this problem or should first understand the structure of the discharge door.
When the mixer door, the sealing strip should be close to the discharge door around. The opening and closing of the discharge door is mainly by the cylinder through the linkage mechanism to achieve, (sometimes customised for the electric actuator), the cylinder pressure is large enough otherwise the discharge door can not achieve the effect of sealing, resulting in material leakage.
Mixer leakage is caused by the following factors:
1. Mixing time
Mixing time, mainly based on different materials from manufacturers to find their own, the decision of the company's product manuals give the time is only a reference time.
2. Mixer residue
Mixer residue refers to the mixer after discharging the material left inside the body of the part not discharged, this part of the material is mainly by the gap between the rotor and the slot and the size of the discharge door to decide, which is mainly dependent on the quality of the manufacturing, overhaul will be more difficult.
Previous Page
Next Page
Related News
Kneader working principle is by a pair of each other together and rotating blades (generally Z-shaped) to generate a strong shear effect and make the semi-dry condition or rubbery dense plastic materials can make the material sensitive to sound so as to get a proportional mixing of dishes and configuration.
Structure and principle of stainless steel reactor
Stainless steel reactor is electrically heated reactor has the characteristics of fast temperature rise, high temperature resistance, corrosion resistance, hygiene and no pollution to the environment.
Plastic chemical raw material prices with the development of the economy is also rising, in the face of this phenomenon, the state in recent years has also vigorously urged the development and transformation of the plastic recycling granulator industry.
Plastic granulator how to plastic waste utilisation
Plastic granulator head and mould: the head consists of alloy steel inner sleeve and carbon steel outer sleeve. The head is equipped with a forming mould.
Service Hotline:
After sales:
Customer Service 1:15253566888
Customer service 2:15106511778
Pre-sales:
Customer Service 1:15064512888
Customer service 2:13695442001
Laizhou Keda Chemical Machinery Co., Ltd
Address： Xidingjia, Shahe Town, Laizhou City, Shandong Province
Tel：0535-2377668
Tel：15253566888
Fax：0535-2377767
Two-dimensional code
WeChat Public Number
Copyright - 2023 All Rights Reserved of Laizhou Keda Chemical Machinery Co., Ltd.Powered by www.300.cn SEO
